honed-tube-h8-h9
p3-gallery-packed-tube-bundles
p3-gallery-honing-machine-orange
p3-gallery-bore-measurement
Measuring a honed tube bore with a vernier caliper
Honed Tubes

Honed Tube — H8/H9

Honed tube with a finished bore for hydraulic and pneumatic cylinder barrels. The bore is honed to H8 with a surface roughness of Ra 0.2–0.4 μm, so the tube arrives ready to use — no further boring needed.

Specifications

Bore tolerance
H8
Surface roughness
Ra 0.2–0.4 um
Materials
E355 (ST52), CK45 (C45E), SAE 1026 (equivalents on request)
Standards
EN 10305-1, EN 10305-4, ASTM A519, GB/T 8713
Inside Diameter
20–500 mm
Outside Diameter
30–600 mm
Length
1–9 m, or customized as per customer requirements
MOQ
2 tons
Lead Time
10–15 days
Honed tube with a finished bore for hydraulic and pneumatic cylinder barrels. The bore is honed to H8 with a surface roughness of Ra 0.2–0.4 um, so the tube arrives ready to use — no further boring needed.
Materials E355 (ST52), CK45 (C45E) and SAE 1026. Cut to length, chamfered and deburred; the bore is protected with anti-rust oil and end caps. End machining — ports, threads and grooves — is available on our machined barrel page.
Inspection covers inside diameter, roughness, roundness and straightness. A dimensional inspection report ships with every order. Inside diameter 20–500 mm, outside diameter 30–600 mm, length 1–9 m or customized as per customer requirements; MOQ 2 tons; lead time 10–15 days.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

srb-tube
Honed Tubes

Skived and Roller Burnished (SRB) Tube

Skived and roller burnished (SRB) tube — the alternative to honing for cylinder bores. Skiving cuts the bore to size, roller burnishing then compresses and smooths it to Ra 0.2 um, leaving a fine cross-hatch that holds oil on the sealing surface.

View product